User's Manual

130/346 Issue 01 - April 2001 - Draft 04 3CC12426AAAA TQ BJA 01
234
4.1.2.2 – Entry fields
4.1.2.3 – Confirmation, closing a window, canceling an entry
In the lower part of the windows there may be buttons (which may or may not be active; cf. § 4.1.2.2 –
Entry fields), the principle of which is as follows:
4.1.2.4 – Sorting and searching in a list
Some screens contain lists which may contain many lines; a sort and/or search tool is therefore available
via the MMI, in order to facilitate data management:
4.1.2.5 – Selecting lines on a list
To select a line, click on it and it is highlighted in blue.
To select quickly a zone, click on the first line then select and hold down the 'Shift' key, then click on the
last line of the desired zone. The zone becomes highlighted in blue.
To select several non consecutive lines, hold down the 'Ctrl' key then select line by line the desired
elements.
The grayed out fields are for consultation only: their content cannot be
modified.
The fields on a white background can be modified: left-click to make the
cursor appear inside the field, then enter the character string required.
According to the same principle, the buttons, icons and items in the pull-down
menus become grayed out when they are inactive.
Click on... To......
...confirm the data entry, while keeping the window open.
...close the active window, thereby cancelling any unconfirmed data entries.
...cancel the data entry, while keeping the window open.