User's Manual

3CC12426AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 133/346
234
4.2 – Running and quitting the software
4.2.1 – Installation of the 7390 LT software
The 7390 LT is either loaded on the PC which came with the BS, or comes on an installation medium
(e.g., CD-ROM).
If you need to install the 7390 LT software, refer to the Appendix 2 – Installation of 7390LT software;
otherwise, go directly to the next paragraph to run the already installed software.
4.2.2 – Accessing and running 7390 LT
To run 7390 LT, go to the Windowsâ taskbar and left-click on the Start button: the Start menu is
displayed. Next, select the Programs menu followed by the line Craft_Terminal.
or:
To run the 7390 LT, the following screen is displayed:
Note: After NE connexion (cf. § 4.3.1 – NE Connection), the database versions at the Manager
and Agent sides must be identical.
If the LT session cannot open, check if there is any other LT open session.
ON THE ETHERNET PORT IT IS RECOMMENDED TO CONFIGURE
ONLY ONE IP ADDRESS
Click on the icon shown here which is on the Windows desktop.
Click here to close the About window and work on the main window of the 7390 LT. You can
access it again by selecting the heading About 7390 LT (Craft_Terminal) in the ? menu.
7390LT software version.
Version of the «Info Model» common
exchhange database at the Manager
(7390LT) side
Version of the «Info Model» common
exchange database at the Agent (NE) side,
filled in automatically upon connection to the NE
Short-cut to the Microsoft
w
system management function (refer
to corresponding documentation)