User's Manual
22/70 Issue 01 - April 2001 - Draft 03 3CC12425AAAA TQ BJA 01
24
The single NT configuration is composed of a single X-Pol RT and a single NT. The dual NT configuration
is composed of a single X-Pol RT and two NTs linked to the X-Pol RT via a splitter module. The single
NT configuration pre-wired for and additional NT is identical to the Dual NT configuration, except that the
second NT and associated cable is replaced by a 75 ohm termination load. This configuration is
recommended wherever a second NT may be required in the future, as it allows the installation of the
additional NT without removing the first NT from service.
2.6 – Technical specifications of the Terminal Station (7390TS)
2.6.1 – X-Pol RT/NT specifications
2.6.2 – NT Specifications
There are six types of NT units:
–NT unit:
X-Pol RT NT
Designation
Description
with antenna
30 cm
Observations Description Observations
Dimensions
HxLxP
230 x 230 (mm)
x 80 (mm)
—
1U x 19"
x 240 (mm)
cf. diagram
in § 3 Installation
Weight 3 kg — 3 kg —
Operating air
temperature
– 40°C to + 46°C — – 5°C to + 55°C —
9900 NCA 001 9900 NCD 001 9900 NCE 001
2 x E1 (2 x G703) — 2 x T1 ANSI
2 x Eth 10bT 2 x Eth 10bT 2 x Eth 10bT
85 — 264V a (47 - 63 Hz) 85 — 264V a (47 - 63 Hz) 85 — 264V a (47 - 63 Hz)
9900 NCA 002 9900 NGA 001 9900 NGA 004
1 x E1 2 x E1 (G703) 2 x E1 (2 x G703) LEMO
2 x Eth 10bT 2 x Eth 10bT 2 x Eth 10bT
85 — 264V a (47 - 63 Hz) 85 — 264V a (47 - 63 Hz) 85 — 264V a (47 - 63 Hz)