User's Manual

28/70 Issue 01 - April 2001 - Draft 03 3CC12425AAAA TQ BJA 01
34
Figure 9 – Side-mount X-Pol RT bolts
3. Position the mounting bracket against the pole, and fasten the backing plate using the backing plate
nuts and bolts shown in Figure 10 – Securing the backing plate. Tighten the four backing plate nuts
to 4.1 Nm (36 in.-lb).
Figure 10 – Securing the backing plate
4. Install the provided plugs in the drain holes on the side and top of the X-Pol RT antenna housing.
Ensure that the drain hole located at the bottom of the X-Pol RT antenna housing is clear of
obstructions.
Side-mount X-Pol RT
Mounting bolts
Lock washer
Flat washers
Front of mounting
bracket
Mounting bolts
Lock washer
Flat washers
Nut
Lock
washer
Flat
washers
Pole
Backing plate
Bolts
(two per side)