User's Manual

3CC12425AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 03 7/70
14
1 – Foreword
1.1 – Structure of the manual
This manual is for users with a sound knowledge of how to operate and install point-multipoint
microwave systems and how to use a PC-based craft terminal running the Windows
TM
operating
system. With it, you should quickly be able to operate the equipment. It is not intended to replace the
training services that we can provide for your particular needs.
The manual is divided into six sections followed by appendixes:
– Foreword
– Equipment overview
– Installation of the X-Pol RT’s 7390 Terminal Station
– Commissioning the 7390 Terminal Station
– Operation and maintenance
– Changes of configuration
– Appendixes
1.2 – Using the manual
With this manual, you should be able to commission and operate the described equipment to a basic
level.
You should always read this manual in conjunction with the attached "Update" document (if provided) so
that you are aware of the latest equipment upgrades.
Manual updates
This edition of the manual describes hardware and software releases of the following revision indexes
and above:
Hardware revision: 01
In cases where an equipment upgrade affects the content of the manual, the relevant modification should
be inserted in the "Update" document, with the same reference number, but with code type VE (instead
of TQ).
When the number or extent of the changes justifies it, they should be incorporated in the body of the
manual and the manual's revision index should be incremented. Revision bars will show the differences
from the previous version.
Note: MS-DOS, MICROSOFT and WINDOWS are registered trademarks of Microsoft Corporation.