User's Manual

3CC12426AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 215/346
234
4.13.2.2– Configuration of NT Ethernet ports
Note: Do not enter more than 60 characters.
Note: When a NT port is full duplex the Configuration State field is deactivared in the other port.
When the Administrative State is unlocked the Configuration State field is deactivated.
To access the NT Ethernet ports configuration, click on the button shown
here (on the button bar of the IP screen).
Quick search (cf: § 4.1.2.4 –)
Click on the arrow to select the NT used in the cross-connection from the pull-down list
The NT ID number is displayed
automatically once the NT is
selected
Click here to apply
the ports configuration
The designation of the Ethernet ports
of the selected NT is to be performed
in the NT Details screen (cf:§ 4.6.3 –)
Click here to cancel the
current configuration
Administrative state of the
Ethernet port of the selected NT:
locked or unlocked
Operational state of the
Ethernet port of the selected
NT: enabled or disabled
Click here to return
to the IP links list
Configuration state of the Ethernet
port of the selected NT: half duplex
or full duplex