User's Manual

3CC12426AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 223/346
234
4.14.2.1– Backing up a system configuration
The backup takes place in two phases: the conversion of the contents of the ANT memory into a file
that can be transferred then the transfer of the configuration file to the LT database.
To access the backup management, click on the Backup tab of the Backup / Restore Management
screen (see § 4.14.2 – Backup / Restore).
Backup has terminated successfully once the file result field displays "no error", the file size is not zero
and the file status is "ready".
– Change the transfer file name after clicking on the Select button of the previous screen:
Note: The destination directory must be shared in NFS format: see NFS server configuration in A.2.6.3
– Configuring the NFS server.
2-Click here to run the
backup file to the LT
Click here to stop the
file transfer to the LT
Click here to exit the
Backup / Restore functions
Size of backup file
Status of generated
file: no error/no
space/write error
Current backup file
path
Reservation status of the backup file:
«reserved/not reserved»: backup
can only run if «not reserved»
1-Click here to select the destination path
for the backup file and rename it (see screen
below: Enter the name of the File to be
transfered by the agent)
1.Click on the arrow to select
the destination disk
2.Open the destination
directory by double-clicking on it
3.Click here to enter the backup
file name