User's Manual

230/346 Issue 01 - April 2001 - Draft 04 3CC12426AAAA TQ BJA 01
234
4.14.3.4– Software import
To load the software to the boards:
Note: this button is activated once the selections described in the previous paragraph have been
made.
A screen indicating the progress of the downloading is displayed:
Note: During the download phase, it is forbidden to insert any board in the DBS.
Note: If NTs were to be inserted during downloading, their download statistics would not be updated.
Note: If the status DOWNLOAD becomes red because of a time out, it does not mean that the software
import step was interrupted by error.The loading is still going on in the system. But the operator
will have to start the sofware import again.
Click on the «Download» button shown here (provided it is active) of the
Software Management screen button bar.
The sequencing of the download phases is permanently displayed,
throughout the download. The sequence is presented on the left of
the window, and features the following color code:
- white: step not carried out ;
- white with gray writing: step not required ;
- green: step underway ;
- yellow: step successfully completed ;
- sky blue: current step canceled ;
- red: step interrupted by error.
Status of downloading
progress
Number of boards downloaded Progress bars
Number of NTs
downloaded
Number of NTs
that could not be
downloaded
Number of NTs
to be downloaded
Accessible after manually
interrupting («Abort»
button) the downmoad:
click here (if active) to close
the window
Click here to continue downloading and
to display the download report (cf: §
4.14.3.5 –) (button active as soon as the
BS side download is 100% complete)
Number of boards
which have not be
downloaded
Number of boards to be downloaded
During download, click
here (if active) to cancel
the current step