User's Manual

246/346 Issue 01 - April 2001 - Draft 04 3CC12426AAAA TQ BJA 01
278
6.2.5 – Validation of upstream for IP data traffic
The validation of upstream for IP data traffic allows to be able to create IP services (cf. § 4.7.2 IP data
traffic configuration).
6.2.6 – On-demand Service Management
Note: When a service is created, the operator can check bandwidth use by displaying the use radio
resource (see stage III).
Order
number
of steps
Designation Comments
Refer to
paragraph
concerned
I Edit the IP data
traffic configura-
tion.
Go to IP Data Traffic Configuration screen from
the BS Details screen.
4.7.2
II Validate on the
upstream.
- click on the data traffic field for the right upstream
and select "YES" to repeat the same for the other
upstreams to be validated,
- validate the modification by clicking on «Apply».
4.7.2
III Check configured
bandwidth.
Check on the IP Data Traffic Configuration
screen that the configured bandwidth has been
correctly decreased.
4.7.2
Order
number
of steps
Designation Comments
Refer to
paragraph
concerned
I Access the On-
demand Service
Management
screen
From the BS Details screen, access the On-
demand Service Management screen.
4.5
II Overbooking
configuration
In the On-demand Service Management screen:
- choose the radio link to manage.
The different possible actions are:
- for the downstream channels:
- define the overbooking factor limits,
- select or no the policing.
- for each upstream channel:
- define the overbooking factor limits,
- select the Guaranteed MCR or allow a
degraded MCR.
- validate by pressing the "Apply" button.
4.7.3.2
III Display of allocated
radio resources
From the BS Details screen, access to the used
On-demand Service Management screen.
- consult the radio resources reserved for the traffic
4.5
4.7.3