User's Manual

250/346 Issue 01 - April 2001 - Draft 04 3CC12426AAAA TQ BJA 01
278
6.2.11– Creation of ASAP table for NT
Note: The new ASAP table is created with severities equal to the severities of the NT default table.
6.2.12– Suppression of ASAP table for NT
Note: No NT must reference the ASAP table to be suppressed.
Order
number
of steps
Designation Comments
Refer to
paragraph
concerned
I Access to ASAP
List screen.
From the menu bar, open ASAP List screen.
4.10.2
II Create a new
ASAP.
- click on the «New ASAP» button,
- enter the new ASAP name.
- validate
4.10.2.1
III Change the alarm
severity profile.
- click on the severity to be changed to make
appear scroll down list.
- click on the «Modify ASAP» button
- select the new severity.
- repeat this action for the severities to be chan-
ged.
- finally, validate by clicking on «Apply».
4.10.2.2
IV Association of
these ASAPs to
NTs.
Go to NT List screen.
- double click on the first NT in the NT Details
screen.
- select wanted ASAP and validate by clicking on
«Apply».
- repeat these actions for the NT whose ASAP
table has to be changed.
4.6
Order
number
of steps
Designation Comments
Refer to
paragraph
concerned
I Select the ASAP. Go to the ASAP List screen, select the ASAP. 4.10.2
II Remove
suppression.
- click on the «delete ASAP» button and confirm
the suppression by clicking on the «OK» button.
4.10.2.3