User's Manual

282/346 Issue 01 - April 2001 - Draft 04 3CC12426AAAA TQ BJA 01
302
7.3.3 – Modification of service parameters
7.3.3.1 – Changing the name of an E1 leased line
7.3.3.2 – Changing the capacity of an E1 leased line
7.3.3.3 – Changing the name of an IP cross-connection
Order
number
of steps
Designation Comments
Refer to
screens or
paragraphs
concerned
I Edit the E1 link
On the leased lines screen:
- select the link to edit
- click on the edit icon
4.12.1.2 –
(E1)
4.12.2.2 –
(X21)
4.12.3.2 –
(T1)
II Modification of link
name
In the modification field:
- enter the new name of the link
4.12.5.4 –
III Validation of the
new name
- click on «OK»
Order
number
of steps
Designation Comments
Refer to
screens or
paragraphs
concerned
I Suppression of the
"cross- connec-
tion" concerned
To modify the contract affected to an allocated line,
the cross-connection must be suppressed first.
6.2.15 –
II Creation of the new
link
Assign the same value to the other parameters
(ports, name, Vpi, Vci) as those of the previous
"cross-connection".
6.2.14 –
III Definition of the
new bit rate
Create the new cross-connection by assigning the
desired TS to the new "cross-connection" (the bit
rate is defined depending on the number of TS
assigned).
4.12.1.6 –
(E1)
4.12.2.6 –
(X21)
4.12.3.2 –
(T1)
Order
number
of steps
Designation Comments
Refer to
screens or
paragraphs
concerned
I Edit the IP link On the IP screen:
- select the IP link to edit
- click on the edit icon
4.13.2.1 –
II Modification of link
name
In the modification field:
- enter the new name of the IP link
4.13.2.5 –
III Validation of the
new name
Click on «OK»