User's Manual

3CC12426AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 285/346
302
7.3.7 – Inhibition of Dynamic traffic on upstream
Note: No IP cross-connection must be present in the system on the upstream to be unvalidated.
II Suppressing NT On the NT List screen:
- select the NT to suppress
- click on the «suppress» button
- confirm by clicking on «OK»
4.6 –
4.6.4 –
III Desactivation of
the upstream.
In the Radio Configuration screen:
- unselect the upstream to be desactivated and
- click on «Apply»
4.7.1 –
IV Modification of the
band width
On the Radio Configuration screen:
- modify the band width
- click on the «Apply» button to take into account
the modifications
- click on the «Close» button to exit the window.
4.7.1 –
V Activation of the
upstream.
In the Radio Configuration screen:
- select the upstream to be activated and apply.
4.7.1 –
VI Creation of
previously
suppressed NTs
On the NT List screen:
- click on the creation button
- fill in the fields with the same information as for the
suppressed NTs
- click on the «Apply» button to validate
- click on the «Close» button to exit the window.
4.6 –
VII Checking Check the re-created NTs are in the NT list. 4.6 –
VIII Alarms
disappearance
- Wait for the disappearance of alarms from the
NTs (approximately 10 minutes).
If alarms persist, see Chapter 6
4.10.1.3 –
IX Re-creation of
client services
Re-create the suppressed cross-connections with
the same characteristics as those suppressed in
stage I.
6.2.14 –
X Checking In the different lists for the cross-connections:
- check that the re-created links are in the leased
line links lists (LL) and IP.
4.12.5.1 –
(LL)
4.13.2.2 –
(IP)
Order
number
of steps
Designation Comments
Refer to
screens or
paragraphs
concerned
I Edit the Dynamic
Traffic
Configuration.
Go to Dynamic Traffic Configuration screen from
the BS Details screen.
4.7.2
Order
number
of steps
Designation Comments
Refer to
screens or
paragraphs
concerned