- Alcatel Internetworking, Inc. Switch Troubleshooting Guide

Troubleshooting IP Routing OSPF Troubleshooting
OmniSwitch Troubleshooting Guide September 2005 page 12-25
send Administratively enables/disables debugging messages for packets sent
by OSPF only.
flood Administratively enables/disables debugging messages for the flooding
of Link State Advertisements (LSAs) in OSPF only.
spf Administratively enables/disables debugging messages for OSPF’s
Shortest Path First (SPF) calculations only.
lsdb Administratively enables/disables debugging messages for OSPF’s Link
State Database (LSDB) related operations only.
rdb Administratively enables/disables debugging messages for OSPF’s rout-
ing database (RDB) related operations only.
age Administratively enables/disables debugging messages for OSPF’s
aging process of LSAs only. LSAs are sent out on a periodic basis.
vlink Administratively enables/disables debugging messages for OSPF's
virtual links operations only.
redist Administratively enables/disables debugging messages for OSPF’s
route redistribution process only.
summary Administratively enables/disables debugging messages for all OSPF's
summarizations only. Summarization of routes can be set for stubby
areas and NSSAs.
dbexch Administratively enables/disables debugging messages for OSPF neigh-
bors’ database exchange only.
hello Administratively enables/disables debugging messages for OSPF's hello
handshaking process only.
auth Administratively enables/disables debugging messages for OSPF’s
authentication process only. Authentication can be simple or MD5.
area Administratively enables/disables debugging messages for OSPF's area
events only.
intf Administratively enables/disables debugging messages for OSPF’s
interface operations only.
mip Administratively enables/disables debugging messages for MIP process-
ing of OSPF specific commands only.
info Administratively enables/disables debugging messages for purpose to
provide OSPF information only.
setup Administratively enables/disables debugging messages for OSPF’s
initialization setup only.
time Administratively enables/disables debugging messages for OSPF’s time
related events only. Timers are set for interfaces and LSAs.
tm Administratively enables/disables debugging messages for OSPF’s Task
Manager communication events only.