- Alcatel Internetworking, Inc. Switch Troubleshooting Guide

page -24 OmniSwitch Troubleshooting Guide September 2005

auth Administratively enables/disables debugging messages for OSPF’s

authentication process.

area Administratively enables/disables debugging messages for OSPF’s area

events.

intf Administratively enables/disables debugging messages for OSPF’s

interface operations.

mip Administratively enables/disables debugging messages for MIP process-

ing of OSPF specific commands.

info Administratively enables/disables debugging messages for purpose to

provide OSPF information.

setup Administratively enables/disables debugging messages for OSPF’s

initialization setup.

time Administratively enables/disables debugging messages for OSPF’s time

related events.

tm Administratively enables/disables debugging messages for DRC’s Task

Manager communication events.

all Administratively enables/disables all debugging listed above for OSPF.

Defaults

Platforms Supported

OmniSwitch 6624, 6648, 7700, 7800, 8800

Usage Guidelines

• The debug command allows you to enable debugging on various OSPF functions. These messages can

be highly detailed, or very general, depending upon the debug level set.

• Use the no form of the command to turn off the selected debugging type.

Examples

-> ip ospf debug-type all

Release History

Release 5.1; command was introduced.

parameter default

error | warning | state | recv |

age | vlink | redist | summary |

dbexch | hello| auth | area | intf

all

error