User manual
Viewing Virtual Ports’ Group/VLAN Membership
Page 20-25
Viewing Virtual Ports’ Group/VLAN Membership
You can view the VLAN membership of each virtual interface in the switch. For physical LAN
ports, the virtual interface is the same as a virtual port. However, when multiple services are
set up for a physical port, then each service has a virtual port.
Type
vivl and a Virtual Interface Table displays similar to the one that follows. You can also
specify just the slot and port number to narrow the range of ports displayed.
Virtual Interface VLAN Membership
Slot/Intf/Service/Instance Group Member of VLAN#
-------------------------------------------------------------------------------------------------------------------------------
1 /1 /Rtr /1 1 1
1 /1 /Rtr /2 3 1
1 /1 /Rtr /3 3 23
1 /1 /Rtr /4 3 24
1 /1 /Rtr /5 3 25
1 /1 /Rtr /6 3 5
2 /1 /Brg /1 1 1
2 /2 /Brg /1 1 1
2 /3 /Brg /1 1 1
2 /4 /Brg /1 1 1
2 /5 /Brg /1 1 1
2 /6 /Brg /1 1 1
2 /7 /Brg /1 1 1 22
2 /8 /Brg /1 1 1
3 /1 /Brg /1 1 1
4 /1 /Brg /1 1 1
4 /2 /Brg /1 1 1
4 /3 /Brg /1 1 1
4 /4 /Brg /1 1 1
4 /5 /Brg /1 1 1
4 /6 /Brg /1 1 1
5 /1 /Brg /1 1 1
Slot/Intf/Service/Instance
. Specifies the virtual interface for which AutoTracker VLAN informa-
tion will be displayed. The Slot is the physical slot location to which the virtual interface
maps. The Intf is the physical port to which the virtual interface maps. The Service is the
service type for this interface. The service type may be a Router (
Rtr), Bridge (Brg), Classical
IP (
CIP), FDDI Trunk (Trk), or an 802.10 Trunk (T10). Instance is the specific instance of this
service type. These different instances are identified numerically. The first instance of a
service type belonging to a physical port is identified as 1, the second instance is identified as
2, etc.
Group. The Group to which this virtual interface is assigned. The Group is specified when first
creating an AutoTracker
VLAN.
Member of VLAN #. The AutoTracker VLANs to which this virtual interface belongs. An interface
may belong to more than one
VLAN. For example, a port may contain devices using the IP
Protocol and could match the Port policy of one AutoTracker VLAN and the Protocol policy of
another AutoTracker VLAN. Also, physical ports always remain members of the default VLAN
#1.