User manual

The WAN Port Software Menu
Page 28-29
Viewing Port Parameters
To view port parameters, enter the following command:
wpview 3/<port>
where 3 is the slot number for WAN uplinks, and <port> is the port number for which you
want to view information (either 1 or 2). The following three examples show the
configuration setup screens for a fractional T1 port, a universal serial port, and an ISDN-BRI
port. The display is slightly different depending upon the encapsulation type, either Frame
Relay or PPP.
Fractional T1 Port Example
The following example displays the configuration view screen for a fractional T1 port (port 1)
using Frame Relay. To view 3/1, enter:
wpview 3/1
or
wpv 3/1
A screen similar to following displays:
Configuration View for Slot 3, Port 1.
1) Admin Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UP
2) Protocol Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frame Relay
3) T1/E1 Starting Time Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
4) T1/E1 Number of Time Slots . . . . . . . . . . . . . . . . . . . . . . . . . 24
8) TOS for Voice Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . a0
9) TOS for Voice Signaling Data . . . . . . . . . . . . . . . . . . . . . . . . 60
10) TOS Mask for both TOS Value. . . . . . . . . . . . . . . . . . . . . . . . e0
11 Signaling IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.0.0.0
12) Signaling IP Mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255.255.255.255
15) Loopback Timeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10