- Alcatel Switch/Router User Manual

Displaying the Chassis Summary
Page 9-3
Displaying the Chassis Summary
To display the chassis summary information, enter
sc
at the system prompt. A screen similar to the following will be displayed.
Type: Omni Switch/Router XFRAME 9-slot
Chassis ID: Alcatel
Description: DESCRIPTION NOT SET.
Backplane: 5 SLOT
Master MPM Serial No.: 52601675
Physical Changes: 7
Logical Changes: 0
Number of Resets: 26
Base MAC Address: 00:20:da:02:04:80
Free Slots: 0
The fields displayed by the sc command are described below.
Type. The description of the specific type of chassis or device.
Chassis ID. The chassis ID for this switch.
Description. The description of this chassis. This field is set by the syscfg command, which is
described in Configuring System Information on page 9-23.
Backplane. The style of backplane in this chassis.
Master MPM Serial No. The serial number for the primary MPX.
Physical Changes. The number of physical changes that has occurred since the last reset or
power-on.
Logical Changes. The number of logical changes that has occurred since the last reset or
power-on.
Number of Resets. The number of times this switch has been reset since the configuration file
(mpm.cnf) was first removed.
Base MAC Address. The base MAC address for the primary MPX.
Free Slots. The number of front panel slots not occupied by a switching module.