- Alcatel Switch/Router User Manual

Viewing the Address Translation (ARP) Table
Page 25-11
Finding a Specific MAC Address in the ARP Table
The Ipfind subcommand is used to locate a specific MAC address in the ARP Table based on a
known IP address or host name. (The Macfind subcommand, discussed above, is used to find a
specific IP address based on a known MAC address).
Follow the steps below to display a specific MAC address in the ARP Table.
1. Enter
ipfind.
The following prompt displays:
Hostname or IP address to find:
2. Enter the known IP address or host name (for example, 198.206.184.34).
A prompt similar to the following displays which shows the MAC address that is related to
the IP address entered:
Corresponding MAC address: 00:05:02:c0:7f:11
3. The xlat submenu redisplays:
Enter command (Add/Delete/Show/Flush/Macfind/Ipfind/Quit) (Show) :