User's Manual

3/16/04 Step 5: Returning MAC Information
90-100831-000 Rev 5Alcatel OmniAccess Wireless Access Point Quick Installation Guide 19
Step 5: Returning MAC InformationStep 5: Returning MAC Information
When you have completed the installations as outlined in Step 4: Mounting the OmniAccess APs, return
the MAC addresses and their locations on the maps or floor plans to the network planner or manager.
The OmniVista Air Control System Software (ACS Software) operators will use the MAC address and
location information to create maps for precise wireless Alcatel Wireless Operating System
management.
Also return any unused mounting kit hardware and external power supplies to the network planner or
manager for use in future deployments.
Note: Please remind the Network Planner or Manager that now is a good time to register the
OmniAccess APs at http://www.alcatel.com/.