User's Manual

3/16/04 Step 3: Preparing Mounting Locations
90-100832-000 Rev 5Alcatel OmniAccess Wireless Access Point Quick Installation Guide 13
Step 3: Preparing Mounting LocationsStep 3: Preparing Mounting Locations
On your map, you should have the OmniAccess AP locations, mounting options, and power options.
• Find the required mounting locations.
• Use the ceiling-mount base to mark the wall or ceiling locations for sheet metal, drywall, or
other screws. Make sure you leave enough space around the OmniAccess AP and base to plug
the CAT-5 cable, optional external antenna cable(s), optional power supply cable, and optional
Kensington MicroSaver Security Cable into the sides of the OmniAccess AP.
Figure - Factory-Supplied Mounting Options
• Alternatively, attach the hanging ceiling clips to the OmniAccess AP. Make sure you leave
enough space around the OmniAccess AP to plug the CAT-5 cable, optional external antenna
cable(s), optional power supply cable, and optional Kensington MicroSaver Security Cable into
the sides of the OmniAccess AP.
• Alternatively, use the optional mounting bases and/or brackets to mark the wall or ceiling
locations for sheet metal, drywall, or other screws. Make sure you leave enough space around
the OmniAccess AP and brackets to plug the CAT-5 cable, optional external antenna cable(s),
optional power supply cable, and optional Kensington MicroSaver Security Cable into the sides
of the OmniAccess AP.