Instructions
Table Of Contents
- 1Introduction
- 2.1 Unboxing
- 2.2 Install your desk ph
- 3.1 M7 DeskPhone
- 3.2 M5 DeskPhone
- 3.3 M3 DeskPhone
- 3.4 Main screen
- 3.5 Call management scre
- 3.6 Navigation keys
- 3.7 Permanent features k
- 3.8 Programmed key icons
- 3.9 Status icons/ Call i
- 3.10 Alpha-numeric keybo
- 3.11 Description of the
- 4.1 Information about th
- 4.2 Multiple SIP account
- 4.3 Making call
- 4.4 Receiving a call
- 4.5 Switching between au
- 4.6 Redialing
- 4.7 Contacts management
- 4.8 Manage the call log
- 4.9 Speed dial management
- 4.10 Sending DTMF signals
- 4.11 Mute, so that your
- 4.12 Auto answer
- 4.13 Make an intercom ca
- 4.14 Configure the interc
- 4.15 Change PIN code
- 4.16 Lock / unlock your
- 4.17 During conversation
- 4.18 Making a second cal
- 4.19 Answering a second
- 4.20 To cancel your secon
- 4.21 Placing a call on ho
- 4.22 Switching between ca
- 4.23 Transferring a call
- 4.24 Three-way conferenc
- 4.25 Five-way conference
- 4.26 Hide your phone num
- 4.27 Reject anonymous ca
- 4.28 Do not disturb
- 4.29 Forwarding to a numb
- 4.30 Cancelling all forw
- 4.31 Listen to your voicem
- 4.32 Defining a 'hotline'
- 5.1 Use your desk phone a
- 5.2 Configure your phone
- 5.3 Connect your phone t
- 5.4 Hot Desking
- 5.5 Third-Party Call Con
- 6.1 Adjusting the audio
- 6.2 Selecting language
- 6.3 Adjusting the bright
- 6.4 Enable screensaver a
- 6.5 Define the voicemail
- 6.6 Programmable keys
- 6.7 Call pick-up
- 6.8 Install a USB access
- 6.9 Headset mode
- 6.10 Define time and dat
- 6.11 Manage Bluetooth® de
- 7.1 Technical code / Dat
- 7.2 Software version / D
- 7.3 Access to administra
- 8.1 List of accessories
- 8.2 Add-on module
- 8.3 EGO Personal confere
- 8.4 Wall mounting kit
- 11.1 Safety Instructions
- 11.2 Regulatory Statemen
- 2Getting started
- 3Getting to know your telephone
- 4Using your telephone
- 4.1Information about the phone
- 4.2Multiple SIP accounts
- 4.3Making call
- 4.4Receiving a call
- 4.5Switching between audio modes
- 4.6Redialing
- 4.7Contacts management
- 4.7.1Contact card
- 4.7.2Contacts management
- 4.7.3Call your contact
- 4.7.4Create a new contact in your local directory
- 4.7.5Create a new group
- 4.7.6Modify a contact
- 4.7.7Delete a contact in a directory
- 4.7.8Delete all contacts in a directory
- 4.7.9Delete a group in the local directory
- 4.7.10Delete all group in the local directory
- 4.7.11Import contacts from your mobile phone via Bluetoo
- 4.8Manage the call log (History)
- 4.9Speed dial management
- 4.10Sending DTMF signals
- 4.11Mute, so that your contact cannot hear you
- 4.12Auto answer
- 4.13Make an intercom call
- 4.14Configure the intercom incoming calls
- 4.15Change PIN code
- 4.16Lock / unlock your telephone
- 4.17During conversation
- 4.18Making a second call during a conversation
- 4.19Answering a second call during a conversation
- 4.20To cancel your second call and recover the first
- 4.21Placing a call on hold (hold)
- 4.22Switching between calls (Broker call)
- 4.23Transferring a call
- 4.24Three-way conference
- 4.25Five-way conference with internal contacts) (M7, M
- 4.26Hide your phone number
- 4.27Reject anonymous calls
- 4.28Do not disturb
- 4.29Forwarding to a number
- 4.30Cancelling all forwards
- 4.31Listen to your voicemail
- 4.32Defining a 'hotline' number
- 5Do more with your desk phone
- 6Programming your telephone
- 6.1Adjusting the audio functions
- 6.2Selecting language
- 6.3Adjusting the brightness of the desk phone
- 6.4Enable screensaver and define the delay
- 6.5Define the voicemail number
- 6.6Programmable keys
- 6.7Call pick-up
- 6.8Install a USB accessory (Headset, Handsfree, Louds
- 6.9Headset mode
- 6.10Define time and date format
- 6.11Manage Bluetooth® device (M7)
- 7Contacting your administrator (technical support)
- 8Accessories
- 9Technical specifications
- 10Ordering information
- 11Guarantee and clauses
Copyright @ALE 2020 All Rights Reserved
24
Dial the number.
Select the contact to call in the list of last number dialed.
Use one of the following:
Press the 'take the call' key. Make the call with the active device: handset if unhooked,
headset if connected, otherwise in hands-free mode.
Press the OK key to start the call. Make the call with the active device: handset if
unhooked, headset if connected, otherwise in hands-free mode.
Call
Press the call key to start the call. Make the call with the active device: handset if
unhooked, headset if connected, otherwise in hands-free mode.
# or *
If defined in the phone settings, you can use these keys to initiate the call (
Menu
Features
Key As Send
).
Depending on the system, after dialing the number, the call can be started automatically after a
delay without action.
When you are in hands-free mode, you can take the call at any time on the handset by unhooking
it.
Click the icon in the screen to switch the audio from hand free to headset or from the
handset to headset.
To make an external call, dial the outside line access code before dialing your contact number.
The call will start after a timeout of approx. 10 seconds if there is no action taken after dialling.
If you are using multiple SIP accounts on your phone, you can choose which account to use to
make the call.
4.3.3 Calling by name
You can call a contact by his/her name using the search feature in the company directory.
This feature depends on the system configuration. If necessary, contact your administrator.
You can unhook the handset or the headset to make a call with the handset or the headset
otherwise you make a call in hands-free mode.
Use the alpha-numeric keyboard key to switch between the numeric and alphabetic keyboard.
Open the dialer.
abc
Switch to the alphabetical keyboard.
Enter the first letters of your contact's name.
The search runs as soon as you enter a character (predictive search). The matching
names are displayed.
Use UP/Down key to select the contact you want to call.
Use one of the following: