Instructions
Table Of Contents
- 1Introduction
- 2.1 Unboxing
- 2.2 Install your desk ph
- 3.1 M7 DeskPhone
- 3.2 M5 DeskPhone
- 3.3 M3 DeskPhone
- 3.4 Main screen
- 3.5 Call management scre
- 3.6 Navigation keys
- 3.7 Permanent features k
- 3.8 Programmed key icons
- 3.9 Status icons/ Call i
- 3.10 Alpha-numeric keybo
- 3.11 Description of the
- 4.1 Information about th
- 4.2 Multiple SIP account
- 4.3 Making call
- 4.4 Receiving a call
- 4.5 Switching between au
- 4.6 Redialing
- 4.7 Contacts management
- 4.8 Manage the call log
- 4.9 Speed dial management
- 4.10 Sending DTMF signals
- 4.11 Mute, so that your
- 4.12 Auto answer
- 4.13 Make an intercom ca
- 4.14 Configure the interc
- 4.15 Change PIN code
- 4.16 Lock / unlock your
- 4.17 During conversation
- 4.18 Making a second cal
- 4.19 Answering a second
- 4.20 To cancel your secon
- 4.21 Placing a call on ho
- 4.22 Switching between ca
- 4.23 Transferring a call
- 4.24 Three-way conferenc
- 4.25 Five-way conference
- 4.26 Hide your phone num
- 4.27 Reject anonymous ca
- 4.28 Do not disturb
- 4.29 Forwarding to a numb
- 4.30 Cancelling all forw
- 4.31 Listen to your voicem
- 4.32 Defining a 'hotline'
- 5.1 Use your desk phone a
- 5.2 Configure your phone
- 5.3 Connect your phone t
- 5.4 Hot Desking
- 5.5 Third-Party Call Con
- 6.1 Adjusting the audio
- 6.2 Selecting language
- 6.3 Adjusting the bright
- 6.4 Enable screensaver a
- 6.5 Define the voicemail
- 6.6 Programmable keys
- 6.7 Call pick-up
- 6.8 Install a USB access
- 6.9 Headset mode
- 6.10 Define time and dat
- 6.11 Manage Bluetooth® de
- 7.1 Technical code / Dat
- 7.2 Software version / D
- 7.3 Access to administra
- 8.1 List of accessories
- 8.2 Add-on module
- 8.3 EGO Personal confere
- 8.4 Wall mounting kit
- 11.1 Safety Instructions
- 11.2 Regulatory Statemen
- 2Getting started
- 3Getting to know your telephone
- 4Using your telephone
- 4.1Information about the phone
- 4.2Multiple SIP accounts
- 4.3Making call
- 4.4Receiving a call
- 4.5Switching between audio modes
- 4.6Redialing
- 4.7Contacts management
- 4.7.1Contact card
- 4.7.2Contacts management
- 4.7.3Call your contact
- 4.7.4Create a new contact in your local directory
- 4.7.5Create a new group
- 4.7.6Modify a contact
- 4.7.7Delete a contact in a directory
- 4.7.8Delete all contacts in a directory
- 4.7.9Delete a group in the local directory
- 4.7.10Delete all group in the local directory
- 4.7.11Import contacts from your mobile phone via Bluetoo
- 4.8Manage the call log (History)
- 4.9Speed dial management
- 4.10Sending DTMF signals
- 4.11Mute, so that your contact cannot hear you
- 4.12Auto answer
- 4.13Make an intercom call
- 4.14Configure the intercom incoming calls
- 4.15Change PIN code
- 4.16Lock / unlock your telephone
- 4.17During conversation
- 4.18Making a second call during a conversation
- 4.19Answering a second call during a conversation
- 4.20To cancel your second call and recover the first
- 4.21Placing a call on hold (hold)
- 4.22Switching between calls (Broker call)
- 4.23Transferring a call
- 4.24Three-way conference
- 4.25Five-way conference with internal contacts) (M7, M
- 4.26Hide your phone number
- 4.27Reject anonymous calls
- 4.28Do not disturb
- 4.29Forwarding to a number
- 4.30Cancelling all forwards
- 4.31Listen to your voicemail
- 4.32Defining a 'hotline' number
- 5Do more with your desk phone
- 6Programming your telephone
- 6.1Adjusting the audio functions
- 6.2Selecting language
- 6.3Adjusting the brightness of the desk phone
- 6.4Enable screensaver and define the delay
- 6.5Define the voicemail number
- 6.6Programmable keys
- 6.7Call pick-up
- 6.8Install a USB accessory (Headset, Handsfree, Louds
- 6.9Headset mode
- 6.10Define time and date format
- 6.11Manage Bluetooth® device (M7)
- 7Contacting your administrator (technical support)
- 8Accessories
- 9Technical specifications
- 10Ordering information
- 11Guarantee and clauses
Copyright @ALE 2020 All Rights Reserved
71
*To know the supported dongle, please refer to the Alcatel-Lucent Enterprise website or contact
your administrator.
8.2.1 install the add-on to the desk phone
1- Insert the add-on USB-A connector into the USB-A socket of the desk phone.
2- Use the add-on support to fix it to the desk phone using the provided screw.
3- The add-on is powered by the desk phone if the desk phone is connected to an external
power adapter.
If your desk phone is powered via PoE, we recommend connecting the EM200 to an USB-C
power adapter (DC 5V/2A output, not provided with the add-on).
4- Restart the desk phone (unplug and plug in the power jack if you are using an external
power adapter or the Ethernet connector – LAN).
8.2.2 Install more than one add-on module
It is possible to connect up to three similar add-on modules. It is not possible to connect EM20 and
EM200 add-ons together.
Depending on how the desk phone is powered, you need to use an external power adapter (DC
5V/2A output, not provided with the add-on) connected to the add-on.
Your desk phone is powered via PoE:
You can connect up to one EM20 without an external power adapter.
You can connect three EM20s. One of the add-ons must be connected to an external power
adapter.
You can not connect one EMS200
You can connect up to two EM200s. One of the add-ons must be connected to an external power
adapter.Your deskphone is powered via an external power adapter:
You can connect up to three EM20s without an external power adapter.
You can connect up to two EM200s without an external power adapter.
You can connect three EM200s. One of the add-ons must be connected to an external
power adapter.
To attach another add-on, affix and connect the new add-on to the one that is already connected:
The first add-on is connected to the desk phone.
Insert the new add-on USB-A connector into the USB socket of the installed add-on.
Use the add-on support to fix it to the add-on using the screw provided.