Instructions

Introduction to the AP Group Web Management System
Stellar AP User Guide
ALCATEL-LUCENT ENTERPRISE 36
With SNMP user can monitor AP status in the group through traditional network management platform.
• SNMP Agent – Enable/Disable the SNMP agent on AP. Network management platform can fetch
information from AP through SNMP protocol.
• Community – The credential used to communicate between AP and network management platform.
• SNMP Trap – Enable/Disable AP to send trap to network management platform.
• Trap Server – Network management platform to which AP send SNMP traps.
• Trap List – Specify the trap items needs to be sent to network management platform.
Wireless Page
The Wireless page focuses on advanced wireless functions, including three windows: RF (Radio Frequency),
Wireless Intrusion Detection System/Wireless Intrusion Prevention System (wIDS/wIPS), and wireless
performance optimization, illustrated in Figure 4-23 Wireless Page.
Figure 4-23 Wireless Page
RF Window
Radio Frequency (RF) window is for monitoring the wireless utilization and configuring wireless attributes
like channel and transmitting power.
There are two modes for RF Window, Simplified Mode illustrated in Figure 4-24 RF-2.4GHz and Advanced
Mode illustrated in Figure 4-26. You can launch the Advanced Mode from Simplified Mode by clicking the RF
Window Frame.
Panel of RF displays the monitoring information of channel distribution, can be selected on 2.4G band or
5G band. Channels are separated by different colors, when you move the mouse cursor to the colored
section of the pie chart, it displays the clients connected to the AP group through 2.4G band or 5G band,
illustrated in Figure 4-24 RF-2.4GHz and Figure 4-25 RF-5GHz.