Instructions

AP Management
Stellar AP User Guide
ALCATEL-LUCENT ENTERPRISE 78
used by the AP and the transmit power must be set manually. In manual mode the AP transmit power can be
adjusted in 1 dB increments. These values must be set for both radio bands.
AP LED Specification
Table 6-3: Describes the LED status during different stages of Stellar AP.
Red
Blue
Green
Time Line
Status
ON
Power on
Power on
ON
Bootloader-
OS loading
System start up
Flas
h
System running
Network abnormal (Interface down)
Flash
System running
Network normal, without SSID created
ON
System running
Network normal, single band working, ether 2.4Ghz or 5Ghz working
ON
System running
Network normal, dual bands working, 2.4Ghz and 5Ghz are both working
Flas
h
Flash
System running
Red and Blue LED rotate flash in a specific frequency; OS upgrading
Flas
h
Flash
Flash
System running
3 LED rotate flash in a specific frequency; Used for location an AP
Locate AP or Turn LED Off
Step1: Click in AP Window of Dashboard to launch ‘LED-Off/Locate’ buttons.
Step2: Click ‘LED-Off’ to turn off the LED light.
Figure 6-13 Turn LED off
Step3: Click "Locate" to locate AP.