Instructions

Introduction to the AP Group Web Management System
Stellar AP User Guide
ALCATEL-LUCENT ENTERPRISE 38
Figure 4-26 RF Configuration Window
The left side of the RF Configuration window displays the list of working channels and transmitting power
of all APs in the group. When you pick an AP from the list, its detailed RF information is displayed on the
right side of the window, illustrated Figure 4-26. The global configuration can be used to change 5GHz
channel width for all APs in the cluster for efficiency or you can change the channel width for specific AP
by individually editing it. The latter configuration will take effect if both global setting and specific AP
configuration both exist.
You can turn OFF specific wireless radios for APs in the cluster to reduce the radio emissions or for other
purpose with Radio ON/OFF button.
For AP1222, AP1232, AP1322, AP1362 with external antenna deployment, you can specify the gain of the
antenna which you want to use (Note: please subtract cable loss from the gain). AP will coordinate and
comply with local law on signal transmitting.
By default, the working channel and transmitting power are automatically managed by Radio Dynamic
Adjustment™ (RDA) technology. You can specify the channels list/power range applicable for auto
selection, which can reduce the risk of low power transmitting or DFS channel conflict. If you want to set
the channel and power values for an AP manually, you need to disable the ACS/APC function on the AP,
illustrated in Figure 4-27.