User's Manual
Table Of Contents
- 7368 ISAM ONT G-120W-F Product Guide
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI ONT safety guidelines
- 3 ETSI environmental and CRoHS guidelines
- 4 ANSI ONT safety guidelines
- 5 G-120W-F unit data sheet
- 5.1 G-120W-F part numbers and identification
- 5.2 G-120W-F general description
- 5.3 G-120W-F software and installation feature support
- 5.4 G-120W-F interfaces and interface capacity
- 5.5 G-120W-F LEDs
- 5.6 G-120W-F detailed specifications
- 5.7 G-120W-F GEM ports and T-CONTs
- 5.8 G-120W-F performance monitoring statistics
- 5.9 G-120W-F functional blocks
- 5.10 G-120W-F standards compliance
- 5.11 G-120W-F special considerations
- 6 Install a G-120W-F indoor ONT
- 7 Replace a G-120W-F indoor ONT
- 8 Configure a G-120W-F indoor ONT
- 9 ONT configuration file over OMCI
- Customer document and product support
Configure a G-120W-F indoor ONT
104
7368 ISAM ONT G-120W-F Product Guide
3FE-46922-AAAA-TCZZA Issue: 01
Procedure 22 DNS configuration
1 Select Network > DNS from the top-level menu in the Home Gateway window, as shown in
Figure 40.
Figure 40 DNS network window
Table 29 describes the fields in the DNS network window.
Table 29 DNS network parameters
2 Select the Enabled checkbox and click Save to enable DNS proxy.
3 Enter the domain name and IPv4 address and click Add.
Field Description
DNS Proxy Enabled Select the Enabled checkbox to enable DNS proxy
Domain Name Enter the domain name
IPv4 Address Enter the IPv4 address
OriginalDomain Enter the original domain name
New Domain Enter the new domain name
R05.06.01 | June 2017 | Edition 01