User's Manual
Table Of Contents
- 7368 ISAM ONT G-120W-F Product Guide
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI ONT safety guidelines
- 3 ETSI environmental and CRoHS guidelines
- 4 ANSI ONT safety guidelines
- 5 G-120W-F unit data sheet
- 5.1 G-120W-F part numbers and identification
- 5.2 G-120W-F general description
- 5.3 G-120W-F software and installation feature support
- 5.4 G-120W-F interfaces and interface capacity
- 5.5 G-120W-F LEDs
- 5.6 G-120W-F detailed specifications
- 5.7 G-120W-F GEM ports and T-CONTs
- 5.8 G-120W-F performance monitoring statistics
- 5.9 G-120W-F functional blocks
- 5.10 G-120W-F standards compliance
- 5.11 G-120W-F special considerations
- 6 Install a G-120W-F indoor ONT
- 7 Replace a G-120W-F indoor ONT
- 8 Configure a G-120W-F indoor ONT
- 9 ONT configuration file over OMCI
- Customer document and product support
Configure a G-120W-F indoor ONT
112
7368 ISAM ONT G-120W-F Product Guide
3FE-46922-AAAA-TCZZA Issue: 01
Procedure 28 URL filter configuration
1 Select Security > URL Filter from the top-level menu in the GPON Home Gateway window,
as shown in Figure 46.
Figure 46 URL Filter window
Table 35 describes the fields in the URL Filter window.
Table 35 URL Filter parameters
2 Configure the URL Filter.
3 Click Add Filter.
4 To configure additional filters, repeat steps 2 and 3.
Field Description
Enable URL filter Select the checkbox to enable the URL filter
URL filter type Select the Block or Allow checkbox
URL Address Type the URL address
Port Number Type the port number; the default is 80
R05.06.01 | June 2017 | Edition 01