User's Manual

7368 ISAM ONT G-120W-F Product Guide G-120W-F unit data sheet
Issue: 01 3FE-46922-AAAA-TCZZA 55
Notes
(1)
The LED Power light is red by default until the software is running properly, after which it behaves as described in row 1 of Table 6.
5.6 G-120W-F detailed specifications
Table 7 lists the physical specifications for G-120W-F indoor ONTs.
Table 7 G-120W-F indoor ONT physical specifications
Table 8 lists the power consumption specifications for G-120W-F indoor ONT.
Table 8 G-120W-F indoor ONT power consumption specifications
Table 9 lists the environmental specifications for G-120W-F indoor ONT.
WPS Green solid
Green flashing
Off
WiFi protected setup link is up (negotiation and auto-configuration successful)
WiFi protected setup link activity (negotiation and auto-configuration ongoing)
WiFi protected setup link down or no link connected (negotiation has not started or has failed)
WLAN Green solid
Green flashing
Off
WLAN link is up (wireless enabled)
WLAN activity (traffic on wireless link)
WLAN link is down or no link is connected
INTERNET Green solid
Green flashing
Off
HSI WAN is connected: a) the device has an IP address assigned from IPCP, DHCP, or static, and no
traffic has been detected; b) the session is dropped due to idle timeout but the PON link is still present.
PPPoE or DHCP connection in progress
HSI WAN is not connected: a) there is no physical interface connection; b) the device is in bridged mode
without an assigned IP address; c) the session has been dropped for reasons other than idle timeout.
Indicator LED color and
behavior
LED behavior description
(2 of 2)
Description Specification
Width 6.1 in. (155 mm)
Length 3.93 in. (100 mm)
6.7 in. (169 mm with antenna)
Height 0.85 in. (21.6 mm)
Weight [within ± 0.5 lb (0.23 kg)] 0.44 lb (0.2 kg)
Maximum
power (Not
to exceed)
Condition Minimum
power
Condition
4.8 W 2 POTS off-hook, 4 10/100/1000
Base-T Ethernet, Wi-Fi operational
1.92 W 2 POTS on-hook, other
interfaces/services not provisioned
R05.06.01 | June 2017 | Edition 01