User's Manual

4 — Configure a G-241W-A indoor ONT
Alcatel-Lucent 7368 ISAM ONT 4-19
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
Procedure 4-13 Routing configuration
1 Select Network > Routing from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-13.
Figure 4-13 Routing network window
Table 4-12 describes the fields in the Routing network window.
Table 4-12 Routing network parameters
2 Enter the routing information.
3 Click Add.
4 STOP. This procedure is complete.
Field Description
Enable Routing Select this checkbox to enable routing
Destination IP
Address
Enter the destination IP address
Destination
Netmask
Enter the destination network mask
Gateway Enter the gateway address
IPv4 Interface Choose a WAN connection previously created in the WAN network window
from the drop-down menu