User's Manual

Table Of Contents
7368 ISAM ONT XS-240W-A XS-250WX-A Product
Guide
Configure an XS-240W-A or XS-250WX-A indoor
ONT
Issue: 01 Edition 01 119
Procedure 30 DMZ and ALG configuration
1 Select Security > DMZ and ALG from the top-level menu in the 10G PON Gateway window,
as shown in Figure 50.
Figure 50 DMZ and ALG window
Table 40 describes the fields in the DMZ and ALG window.
Table 40 DMZ and ALG parameters
2 Configure ALG.
3 Click Save ALG.
4 Configure DMZ.
Field Description
ALG Config Select the checkboxes to enable the protocols to be supported by the ALG: FTP,
TFTP, SIP, H323, RTSP, L2TP, IPSEC, PPTP
DMZ Config
WAN Connection List Choose a WAN connection from the drop-down menu
Enable DMZ Select this checkbox to enable DMZ on the chosen WAN connection
DMZ IP Address Choose Customer Setting and enter the DMZ IP address or choose the IP address
of a connected device from the drop-down menu
R05.06.00 | March 2017 | 3FE 46861 AAAA TCZZA | Edition 01