User's Manual

Table Of Contents
Install an XS-240W-A or XS-250WX-A indoor ONT
70
7368 ISAM ONT XS-240W-A XS-250WX-A Product
Guide
Edition 01 Issue: 01
10 If used, enable the Wi-Fi service.
i Locate the WLAN button on the ONT; see Figure 23 for location of the WLAN button.
Figure 23 XS-240W-A and XS-250WX-A indoor ONT WLAN and WPS
buttons
ii Press the WLAN button to change the status of the Wi-Fi service.
11 If used, enable the WPS service.
i Locate the WPS buttons on the ONT; see Figure 23 for location of the WPS buttons for
2.4G and 5G Wi-Fi.
ii Press the WPS buttons to change the status of the Wi-Fi Protected Service.
12 Verify the ONT LEDs, voltage status, and optical signal levels; see the 7368 Hardware and
Cabling Installation Guide.
13 Activate and test the services; see the 7368 Hardware and Cabling Installation Guide.
14 If used, configure the SLID; see the 7368 ISAM ONT Configuration, Management, and
Troubleshooting Guide.
LE
D
O
N
/OF
F
WLA
N
WPS
2.4G
WP
S
5
G
LED ON/OFF
WLAN
WPS 2.4G
WPS 5G
Stand
Mounting
bracket
(back)
26022
Front
R05.06.00 | March 2017 | 3FE 46861 AAAA TCZZA | Edition 01