User's Manual

7368 ISAM ONT XS-240W-A XS-250WX-A Product
Guide
Configure an XS-240W-A or XS-250WX-A indoor
ONT
Issue: 01 Edition 01 99
Procedure 17 WAN networking configuration
1 Select Network > WAN from the top-level menu in the 10G PON Gateway window, as shown
in Figure 37.
Figure 37 WAN network window
Table 28 describes the fields in the WAN network window.
Table 28 WAN network parameters
Field Description
WAN Connection List Choose a WAN connection from the drop-down menu to set the
connection parameters
Connection Type Select a connection type: IPoE or PPPoE
IP Mode Choose an IP mode from the drop-down menu: IPv4 or IPv6
Enable/Disable Select this checkbox to enable the WAN connection
NAT Select this checkbox to enable NAT
Service Select the checkboxes to enable service types for this connection
Enable VLAN Select this checkbox to enable VLAN
VLAN ID Enter the VLAN ID
VLAN PRI Enter the VLAN PRI
(1 of 2)
R05.06.00 | March 2017 | 3FE 46861 AAAA TCZZA | Edition 01