User's Manual
Tools required for installation
Overview
This section provides a master list of all tools, materials, and parts required to perform the
installation.
Tools
CAUTION
Personnel injury or equipment damage
If the installation is performed with energized DC circuits, be sure to use tools that are
properly insulated.
The following is a master list, in alphabetical order, of all tools that may be utilized
during installation:
• Adjustable open-ended wrench (or set of fixed open-ended wrenches)
• Antioxidant compound
• B connecting links, or equivalent (quantity 3)
• Bolt anchor setting tool
• Bonding clamps for facility and phone line cables (normally provided by telephone
company)
• Box cutter or equivalent for opening packages
• Chalk line
• Channel-lock pliers [for 2-1/2 i nch nuts, 19 mm (3/4 inch) wide, maximum]
• Channel-lock pliers (standard)
• Crimping tools 22-16 gauge, 10-4/0 gauge (5-120 mm
2
) for installing terminal lugs
and c-taps
• Derrick, capable of lifting the cabinet
• Drill and drill bits [including 16 mm (5/8 inch) and 18 mm (11/16 inch) for drilling
anchor holes]
• Drill - Pneumatic Hammer (R-5006)
• Roto-Stop Hammer Kit (R-4416) with 1/2 inch (12 mm) chuck or equivalent to drill
anchor holes
• Ear protection gear
• Electrical conduit installation equipment and materials
• Electrical tape
Tools, materials, and checklist
Preparatory information
Tools required for installation
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
9412 eNB Compact
418-000-415
Issue 4.1 August 2011
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
3-3