User's Manual

• ESD wrist strap
• Eye-bolts (M10/R-ITE-6111), for lifting cabinet
• Eye protection gear
• Fish tape
• Floor punch, for cutting asbestos floor tile prior to drilling
• Floor tile puller, for raised floor tiles
• Forklift, Hoist, Rol-A-Lift, or equivalent lift (non-tilt) capable of lifting and moving
the cabinet into final position
• Galvanizing paint
• Gloves -- L ow-voltage rubber lineman's gloves (R-4285)
• Hammer, 0.5 kg (16 oz) for anchor installation, etc.
• Heat gun for heat shrink tubing
• Insulated gloves
• Insulated hand tools (for completing electrical connections)
• Ladder or work stand/stool so installer can access top of the cabinet and ladder rack.
Most connections are elevated. Two work platforms are required so two installers can
work efficiently.
• Level 1.5 meters (4 feet), steel
• Lifting device (R-5312) and lifting boom
• Marker, for marking floor for lineup and drilling
• Measuring tape
• Nut driver set (decimal) with 10 inch extension
• Nut driver set (metric) with 250 mm extension
• Ohmmeter (multimeter, volt/ohmmeter, or equivalent)
• Pliers
• Plumb line
• Pry bar
• Safety goggles or glasses (R-3055)
• Screwdrivers (power and manual), flat-blade, Phillips
• Silicone caulk
• Socket sets (decimal and metric) various drives
• Socket with 6”extension (to bolt cabinet to the floorstand)
• For stripping tools for jumper cables go to table for “Jumper cable and connector
stripping tools”
“Jumper cable and connector stripping tools” (p. 7-10)
• Torque wrenches,2-34Nm(17.7 - 300 in-lb)
• Torque wrenches, 6 - 200 Nm (4.4 - 150 ft-lb)
Tools, materials, and checklist
Preparatory information
Tools required for installation
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-4
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
9412 eNB Compact
418-000-415
Issue 4.1 August 2011