User's Manual
Site requirements for wall mount installation of DC
Distribution/Fiber Management Box
Overview
This topic describes the requirements for installing the DC Distribution/Fiber
Management Box on a wall.
Prepare site for wall mount installation
The following are required to prepare a site for wall mount installation of the DC
Distribution/Fiber Management Box.
• Install grounding system
• Wall mounting
Wall mounting shall comply with the applicable architectural codes listed earlier in this
chapter.
Holes shall be pre-drilled with (customer supplied) anchor hardware, if mounting to a
concrete wall.
Unistrut shall be in place, if it is required for mounting cabinet.
Cabinet wall mounting hardware
The following is a sample of customer-supplied mounting hardware that is required for
mounting struts to a solid concrete wall:
• 1.5 inch x 1.5 inch Unistrut® or equivalent struts (2)
• M10 (3/8 inch) x 100 mm (4 inch) long Power-Stud™ (formerly called Rawl-Stud®)
or equivalent anchor bolts for solid concrete walls (4)
• M10 (3/8 inch) nuts (4)
• M10 (3/8 inch) flat washers (8)*
• M10 (3/8 inch) spring nuts from the same manufacturer as the struts (4)
• M10 (3/8 inch) x 25 mm (1 inch) long hex-head bolts (4)
• M10 (3/8 inch) lock washers (4).
Location of DC Distribution/Fiber Management Box
The DC Distribution/Fiber Management Box should be installed within a 25 foot conduit
distance from the 9927 Distributed BTS outdoor cabinet.
Basic site preparation requirements and footprints for DC
Distribution/Fiber Management Box
Site requirements for wall mount installation of DC
Distribution/Fiber Management Box
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
7-4
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
9927 Dist BTS Outdoor
401-703-516
Issue 1 March 2012