User's Manual

ManualsBrandsAlcatel-Lucent USA ManualsElectronicsPCS Wireless Base Station Transceiver

181

182

183

184

185

186

187

188

189

190

Item # Description Yes (Y) No (N) N/A Comments

10. Are all ground connections in compliance

with Alcatel-Lucent requirements

(exothermic weld, compression type with

2-hole lugs; properly secured; antioxidant

used on contact surface area) ?

Y N N/A

11. Are all grounding conductors routed as

straight as possible with no loops or sharp

bends?

Y N N/A

12. Is cabinet support structure grounded? Y N N/A

13. Are metallic conduits bonded at both ends

and 7.62 meter (25 foot) intervals?

Y N N/A

14. Are all fence corner posts and gate posts

properly grounded (including fence fabric

and barbed wire, as applicable) ?

Y N N/A

15. Are all metallic objects in the vicinity

bonded to the grounding system?

Y N N/A

16. Is AC power supply equipped with a surge

protection device and is the device

properly connected to the ground system?

Y N N/A

17. Is T1/E1 line equipped with a surge

protection device and is the device

properly connected to the ground system?

Y N N/A

18. Is tower light system (if installed)

equipped with a surge protection device

and is the device properly connected to the

ground system?

Y N N/A

19. Are the GPS antenna cable shields

properly grounded? Is surge protection in

place and properly grounded GPS

antenna?

Y N N/A

21. Is supplementary conductor connected to

grounding electrode system? (Exposed

end, if any, must be taped.)

Y N N/A

9927 Distributed Base Station Outdoor Cabinet site

preparation checklists

SP-3 Site preparation grounding checklist

....................................................................................................................................................................................................................................

9927 Dist BTS Outdoor

401-703-516

Issue 1 March 2012

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

A-7