User's Manual

SP-4 Site preparation RF antenna checklist
Purpose
The following items must be completed prior to the installation of the RF cell site
equipment. Circle the correct letter for the corresponding item descriptions.
Item
#
Description Yes
(Y)
No
(N)
N/A Comments
1. Is tower properly installed and secured? Y N N/A
2. Are all antenna cable runs installed? Y N N/A
3. Are all antenna cable runs properly
terminated with 7/16 DIN female
connectors on the equipment side?
Y N N/A
4. Are all cable connections torqued to the
appropriate value?
Y N N/A
5. Are the RF antenna cables equipped with
surge protection devices?
6. Are all external cables UV rated? Y N N/A
7. Are antenna cable runs' demarcation
points in proper location?
Y N N/A
8. Are antenna cable runs marked and in
proper sequence per applicable equipment
drawings?
Y N N/A
9. Are appropriate type, length and number
of antenna cable jumpers available?
Y N N/A
10. Are appropriate drip loops provided for
antenna cable runs at turns and
demarcation point?
Y N N/A
11. Have antenna and cable sweeps been
performed?
Y N N/A
12. Are antennas properly installed and
secured?
Y N N/A
13. Are all antennas the proper type? Y N N/A
14. Are all antennas at proper azimuth?
(0,120 or 240 degrees)
Y N N/A
15. Are antennas at proper height? Y N N/A
16. Are antennas at proper tilt? Y N N/A
Site preparation checklists for RRHs SP-4 Site preparation RF antenna checklist
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
9927 Dist BTS Outdoor
401-703-516
Issue 1 March 2012
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
B-9