User's Manual

ManualsBrandsAlcatel-Lucent USA ManualsElectronicsPCS Wireless Base Station Transceiver

Components inside cabinet

Purpose

This section lists the components that can be populated in the 9927 Distributed Base

Station Outdoor Cabinet.

9927 Distributed Base Station Outdoor Cabinet components

The table below lists the components inside the 9927 Distributed Base Station Outdoor

Cabinet.

Components inside 9927 Distributed Base Station Outdoor Cabinet

The 9927 Distributed Base Station Outdoor Cabinet can contain the following modules:

• SAR 7705 SAR-8 (expandable) or 7705 SAR-F (fixed). 7705 SAR-M (future).

• Two 7210 SAS M (-48 VDC) -- only for microwave backhaul

• LTE TDD, 2.6 GHz (Optional) or

• CDMA MT-BBU

• CDMA MT-BBU Growth

• One or two -48 VDC PDPs -- second unit is optional. Needed only for cabinet is upgrade.

• 4-Position SEC-B Tray (ETSI) -- used only with T1/E1 Backhaul. T1/E1 Backhaul is via the SAR.

• Thermal Switch for Power Injectors

• Microwave Power Injector (PIB), -48 VDC

• ACPDA

• GFCI Convenience Outlet

• Heater Assembly

• User Alarm interface

• Alarms

Product overview for 9927 Distributed Base Station

Outdoor cabinet

Components inside cabinet

....................................................................................................................................................................................................................................

9927 Dist BTS Outdoor

401-703-516

Issue 1 March 2012

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

2-13