User's Manual

Lucent Technologies — Proprietary

See notice on first page

20-8

401-660-100 Issue 11 August 2000

AMapping Status Display Page Unit Numbers to

Hardware

Figure 20-5. Logical-to-Physical Unit Mapping for the CAT (Sheet 3 of 3)

Logical-to-Physical

Mappings of

CDMA-Specific

Cell Site Units

The mappings in Figure 20-6 and Figure 20-8 show how the CDMA logical unit

numbers on the status display pages map to their physical counterparts in the

Series II Cell Site. For example, as highlighted in reverse video in Figure 20-6,

logical unit CCC 7 on the status display page maps to the CCC seated in shelf 0,

slot 12, of CDMA growth frame RCF1. In the current RC/V implementation, the

logical-to-physical unit mapping for CDMA units is fixed and cannot be changed by

the user.

Up to two CDMA growth frames, CDMA RCF1 and CDMA RCF2, may reside at a

Series II Cell Site.

CCUs are addressed using a fixed numbering scheme that associates each CCU

with its particular CCC. For example, as highlighted in gray in Figure 20-6,

Sheet 1, address 18-3 identifies CCU 3 associated with logical unit CCC 18.

AMPS/TDMA RCF1

SHELF 0

SHELF 1

FANS

SHELF 3

SHELF 4

SHELF 5

SHELF 2

AMPS/TDMA RCF0 AMPS/TDMA RCF2

TDM0

TDM1

=CAT