User's Manual

Lucent Technologies — Proprietary
See notice on first page
401-660-100 Issue 11 August 2000
21-7
CDMA Maintenance
Executive Cellular Processor Form
The
ecp
form contains the ECP information used to process calls, make service
measurements, and provide automatic message accounting (AMA) information.
The values specified here will be used for each cell served by this ECP unless
other values are specified on an individual cell basis using the RC/V cell forms,
such as
ceqcom2
. The values on the RC/V cell forms for an individual cell take
precedence over the ECP values.
The following new fields have been added to the “CDMA Information (Non-Power
Control)” screen of the
ecp
form:
■
Overhead Channels Functional Test Interval (min)
—The interval
between automatic requests of the CDMA overhead channel functional
test.
The interval value for the routine (scheduled) overhead channel functional
test can be set to any value within the range 1 - 1440 minutes in increments
of 1 minute. The default interval value is 25 minutes.
Value 1439 has special meaning. Setting the interval value to 1439
disables (inhibits) the execution of routine CDMA overhead channel
functional tests and prevents the Cell Sites from reporting an off-normal
alarm to the ECP. (Unlike the
INH
command, which does cause the
targeted Cell Site to report an off-normal alarm to the ECP. The
INH
command is intended for short-term disabling—inhibiting.)
(A Cell Site off-normal alarm indicates one or more of the following off-
normal states at the cell: inhibited, alarmed, out-of-service, overload, or
initializing.)
■
Traffic Path Functional Test Interval (min
)—The interval between
automatic requests of the CDMA traffic path functional test.
The interval value for the routine (scheduled) traffic path functional test can
be set to any value within the range 1 - 1440 minutes in increments of
1 minute. The default interval value is 60 minutes
Value 1439 has special meaning. Setting the interval value to 1439
disables the execution of routine CDMA traffic path functional tests and
prevents the Cell Sites from reporting an off-normal alarm to the ECP.
■
Traffic Path Functional Test MOST DN
—A special directory number
dialed by the CRTU during CDMA overhead channel and traffic path
functional tests
MOST DN stands for mobile station test (MOST) directory number (DN).