User's Manual

Lucent Technologies — Proprietary
See notice on first page
16-20
401-660-100 Issue 11 August 2000
Corrective Maintenance using Status Display Pages
MEM
Identity of the trunk member (1 - 1951). The summary state for the trunk
member is indicated by its video state:
grow
(white on magenta): Trunk can be tested, but not used for call pro-
cessing.
idle
(white on black): Normal state when not handling calls.
busy
(black on green): Normal state when in use for call processing.
tran
(white on red): Transient audit state - In the process of changing
state, one that cannot be obtained immediately.
gard
(white on red): Placed on guard timing after an abnormal termina-
tion in call processing. After guard timing expires, the trunk is restored to
the idle state.
aud
(white on magenta): Trunk is being audited, or waiting for periodic
reset.
reset
(white on red): Periodic reset - Recovery from suspected hard-
ware trouble.
oos
(black on red): Removed from service, or maintenance busy.
uneq
(magenta on black): Unequipped
B
Identifies a radio as a Beacon radio.
b
Identifies the radio as a logical replacement for a failed (automatic radio
reconfiguration [ARR]) Beacon radio.
D
Indicates that the DRU or EDRU associated with the voice channel dis-
played also carries a DCCH.
d
Indicates that the DRU or EDRU associated with the displayed voice
channel is replacing a DCCH DRU or EDRU due to ARR.
ARR is performed using radios of the same hardware type, that is, a DRU
will only be replaced by another DRU, and an EDRU will only be replaced
by another EDRU.
l
Identifies the radio as a logical replacement for a failed (ARR) analog
Locate radio.
s
Identifies the radio as a logical replacement for a failed (ARR) Setup
radio.
Table 16-5. 2133 - Series II Cell VR Status Page Radio Maintenance Indicators
(Contd)
Indicator Description