User's Manual

Lucent Technologies — Proprietary
See notice on first page
22-28
401-660-100 Issue 11 August 2000
Linear Amplifier Circuit (LAC) Maintenance
17.
Replace all faulty LACs, making sure to correctly set the address on any new
LACs. Verify with the MSC that all LAC SANITY alarms have been
cleared.
NOTE:
If replacements are not available, leave all defective LACs disconnected
from the alarm bus until they can be replaced.
Figure 22-6. Location of the Alarm Cable Connector at Top of the RCF
J104