User's Manual

Lucent Technologies — Proprietary
See notice on first page
401-660-100 Issue 11 August 2000
16-23
Corrective Maintenance using Status Display Pages
Conditionally remove
a server group antenna
202
and press
RETURN
.
Unconditionally remove
an SG antenna
203
and press
RETURN
.
Conditionally restore
a radio
300,
followed by the radio
number (0-191) and press
RETURN
.
Unconditionally
restore a radio
301,
followed by the radio
number (0-191) and press
RETURN
.
Conditionally restore a
server group antenna
302
and press
RETURN
.
Generate a server group
antenna status output
message report
402
and press
RETURN
.
Diagnose a radio
500,
followed by the radio number (0-191) and
press
RETURN
(provided that doing so does not
violate
maintenance action rules; for
Diagnose a server group
antenna face
502
and press
RETURN
.
NOTE:
This ends the procedure for using the
2133
page to remove, restore, and
diagnose radios and server group antennas.
Result
:
After the system processes the command, an output message report scrolls up
from the bottom of the window. In addition, the output message report is sent to a
log file. The following is an example of a successful output message report.
Example:
DGN:CELL 1 RA5UC1 COMPLETED CONDITIONAL ALL TESTS PASSED
References:
See the following documents for additional information: