User's Manual

Lucent Technologies — Proprietary
See notice on first page
401-660-100 Issue 11 August 2000
16-41
Corrective Maintenance using Status Display Pages
A remove action on a CCC also removes each associated CCU. Any CCU in the
CDMA cluster that was in the active state just prior to the removal of the CCC is
tagged OOS-POS (out-of-service because parent is out-of-service).
A restore actpCUs. Whether the CCC passes or fails the diagnostic test, all units
in the CDMA cluster are left in the out-of-service state.
NOTE:
Use the
2139 - Cell CCC CCU Status
page to remove, restore, or
diagnose individual CCUs.
2138 Procedure to Remove/Restore/Diagnose or Generate a Status Report
for a CCC, or Inhibit/Allow Routine Cell Diagnostics 0
1. Select
ECP Control & Display
from the
AUTOPLEX(R) System
1000 ECP Access
menu.
2. Open the
2138 - Cell CDMA Equipment Status
page by entering
command
2138,
c (where c is the Cell Site number).
3. At the
CMD<
line,
To. . .
enter...
Conditionally remove a CCC
200,
followed by the cell number (1-222), the
CCC number (1-30) and press
RETURN
.
For example:
200,14,7
and
RETURN
conditionally removes Cell Site 14’s
CCC 7.
Conditionally restore a CCC
300,
followed by the cell number (1-222), the
CCC number (1-30) and press
RETURN
.
Generate a status message
output report
400,
followed by the cell number (1-222), the
CCC number (1-30) and press
RETURN
.
For example:
400,14,7
and
RETURN.
Diagnose a CCC
500,
followed by the cell number
(1-222), the CCC number (1-30) and
press
RETURN
(provided that doing so
does not violate maintenance action
rules; for example, units are out-of-
service or not in the active state).
For example:
500,14,7
and
RETURN.