User's Manual

Lucent Technologies — Proprietary
See notice on first page
401-660-100 Issue 11 August 2000
16-5
Corrective Maintenance using Status Display Pages
2131 - Cell
Equipment Status
Display Page
The
2131 - Cell Equipment Status
page (See Figure 16-2) provides a status
summary of each unit or group of units. It also shows a status indicator for the
activation of the CDMA spectrum swap feature.
In addition, this page has maintenance commands to:
■
Change the cell hardware configuration
■
Generate a cell status output message report
■
Dump the cell maintenance request administrator queue (MRAQ).
For an explanation of the
2131 - Cell Equipment Status
page indicators, (see
Table 16-2.
Table 16-1.
2130 - Cell Site Status Summary Page
Indicators
Summary
State (Note) Description
uneq
Cell Site unequipped in the RC/V
ceqcom2
(Series II) form.
grow
Cell is marked as growth in the RC/V
ceqcom2
(Series II) form.
init
Cell Site transient clear, stable clear, or boot initialization phase.
Whether or not a cell phase is in progress is indicated by the video state
of the
init
indicator:
White on magenta—Cell phase is in progress
Black on magenta—Cell phase is pending (scheduled, but not yet
started).
oos
Both data links are out-of-service, or both reference generators are
alarmed, or call processing has been inhibited.
cpi
Call processing is inhibited.
trbl
Trouble. At least one of the major cell hardware units is out-of-service,
being initialized, or has a major alarm.
ovld
Cell experiencing processor overload.
inh
Inhibited. At least one Cell Site software controller is in the off-normal
state.
<null> (No state) Equipped, but run-time status is not known.
arr_active
Automatic radio reconfiguration (ARR) active for this Cell Site
(no off-normal conditions).
act
Active Cell Site (no off-normal conditions).
Summary states are listed in order of condition priority from the top of this table (highest
or most severe [
uneq
]) to bottom (lowest or least severe [
act
]). (If two or more report-
able conditions exist for the same indicator, only the most important or most critical one
as defined in this list order will be shown.)