User's Manual

Lucent Technologies — Proprietary
See notice on first page
16-50
401-660-100 Issue 11 August 2000
Corrective Maintenance using Status Display Pages
2235 - Restoring/
Diagnosing or
Generating Status
Reports for DCCH
Radios
You can use the
2235 - Cell DCCH Status
page (See Figure 16-12, and Table
16-12) to restore, diagnose, or generate a status output message report for DCCH
radios.
1. Procedure to Restore/Diagnose or Generate Status Reports for DCCH
Radio Procedures
2. Select
ECP Control & Display
from the
AUTOPLEX(R) System
1000 ECP Access
menu.
3. Open the
2235 - Cell DCCH Status
page by entering command
2235,
c
(where c is the Cell Site number).
4. At the
CMD<
line,
To. . .
enter...
Restore a DCCH radio
300,
followed by the DCCH radio number
(0-191) and press
RETURN
.
Unconditionally restore a
DCCH radio
301,
followed by the DCCH radio number
(0-191) and press
RETURN
.
Generate a cell DCCH radio
status output message report
400
and press
RETURN
.
Diagnose a DCCH radio
500,
followed by the DCCH radio number
(0-191) and press
RETURN
(provided that doing
Table 16-12. 2235 - Series II Cell Site DCCH Status Page
Indicator Description
PCS TDMA This indicator is displayed for TDMA PCS cells.
RADIO
Identity of DCCH radio (range 0 - 191; the maximum number of DCCH
radios that can be assigned is currently 21—three per sector). Radios are
identified as follows: radio_number-user_channel_number. The status of
the radio is indicated by its video state alone:
equip
(white on black)
uneq
(magenta on black)
grow
(white on magenta)
act
(black on green)
oos
(black on red)
indt
(black on yellow): indeterminate
arr_oos
(white on red)
arr_act
(green on black).
PF
Identity of physical antenna face (0 - 6).