User's Manual

Lucent Technologies — Proprietary
See notice on first page
17-12
401-660-100 Issue 11 August 2000
Corrective Maintenance using ECP Craft Interface
where
a. Indicates a single Cell Site number.
b. Indicates the radio whose functionality you want to move to
another radio on the same logical antenna face.
UCL
Indicates unconditional execution.
c. Indicates message class override.
NOTE:
See the AUTOPLEX Cellular Telecommunications Systems System 1000
Input Messages (401-610-055) for more information about message
parameters.
Result:
After the system processes the command, an output message report scrolls up
from the bottom of the window. In addition, the output message report is sent to a
log file. The following is an example of a successful output message report.
Example:
REPT:CELL 6, AUTOMATIC RADIO RECONFIGURATION, ACTIVATION
COMPLETED
FRAME SHELF SLOT
FAILED RADIO DCCH RA 8 0 5 4
References:
See the following documents for additional information:
■
AUTOPLEX Cellular Telecommunications Systems System 1000 Output
Messages (401-610-057)
■
AUTOPLEX System 1000 Automatic Radio Reconfiguration Optional
Feature (401-601-027)
Feature documents are contained in AUTOPLEX Cellular Telecommunications
Systems System 1000 Optional Features (401-900-004).
Moving CDMA
Calls to a Specified
Channel Element
You can force a semisoft handoff on an active CDMA call in a particular cell and
channel element (CE) to a specific CE within the same cell sector. This allows you
to free a CE or move a call to a specific CE.
This command is known as the basic craft forced handoff (BCFHO).