User's Manual

xii
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
...........................................................................................................................................................................................................................................................
4.0B dual band cabinet without integrated power: Installation
• Installation Process as a guide to installation steps
• Chapters 2, 3, and 6, Appendix B, and Chapter 7 to finish the
installation
For the installation of power cabinets or frames, use the following
chapters and appendices, as applicable.
If a 4.0B dual band cabinet is installed with existing 1.0, 2.0, 3.0, or 4.0
cabinets that utilize a PowerHouse24 or WNG power cabinet, the total
load for all cabinets is limited to 17kW. The total number of carriers
possible in the 4.0B dual band cabinet will be limited. Use of a dual
band cabinet with Integrated Power is recommended to overcome this
limitation
For the installation of additional cabinets, use the following chapters
and appendices, as applicable.
EZBFo battery frame installation (first and/or second) with a Modular
Cell 4.0B primary or dual band cabinet, which has integrated power:
• Installation Process as a guide to installation steps
• Chapter 2 for handling, placement, anchoring and grounding
• Appendix A for installation instructions
Subjects covered in this manual are listed below.
Installation process Provides an explanation of the installation process,
and includes the "Installation Procedure Checklist".
Chapter 1 "Overview of the Flexent

Modular Cell 4.0B cabinet
installation" provides the following information.
• An overview of the Flexent Modular Cell 4.0B cabinets
• A description of typical installation sites, as well as cabinets.
Chapter 2 "Modular Cell 4.0B and WNG24-BC cabinet handling,
placement, anchoring and grounding" provides the following
information.
• Procedures for anchor installation
• Instructions for installation of optional mounting bases
• Instructions for cabinet handling