User's Manual

xv
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
Conventions used
The following conventions are used in this IP:
Illustrations
The illustrations shown in this IP are schematics. They do not contain
all details and exceptions, but are rather intended to highlight main
points. Dimensions are usually shown in millimeters, with inches in
parenthesis. As an example, 680.0 (26.77) equals 680 millimeters or
26.77 inches.
Naming conventions
The Flexent Modular Cell 4.0B cabinet will be referred to as the
Modular Cell 4.0B cabinet, or merely the 4.0B cabinet.
Standard cross-sections and wire diameters of round copper
conductors
The following table is from IEC standard 60947-1 (c) IEC:1996
+A1:1997+A2:1998.
ISO CROSS SECTION (mm
2
)AWG
120 0000
95 000
70 00
50 0
35 2
25 4
16 6
10 8
610
412
2.5 14
1.5 16
116
0.75 18
0.5 20
0.5 22
0.2 24
DIAMETER (mm) AWG
0.81 20
0.65 22
0.51 24
0.4 26
0.32 28