User's Manual

CONTENTS
ii
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
Lucent Technologies – Proprietary
Use pursuant to company instructions
2 Modular Cell 4.0B and WNG24-BC cabinet handling, placement, anchoring and grounding
3 Cable connections in the Modular Cell 4.0B cabinets
Installation of anchors and optional mounting bases, if applicable
2- 2
Cabinet handling
2- 21
Cabinet placement, anchoring and grounding
2- 28
Cable connection references 3- 2
Installation of the GPS antenna jumper cable for the 4.0B primary
cabinet
3- 3
Connection of the conduit with T1/E1 lines and external user alarms
cables to a 4.0B primary cabinet
3- 13
How to route the T1/E1 cable(s) to a Modular Cell 4.0B dual band
cabinet in a line-up that has a Modular Cell 3.0, 4.0, or 4.0B primary
cabinet with integrated power
3- 16
How to route the T1/E1 cable(s) to a Modular Cell 4.0B dual band
cabinet in a line-up that has a Modular Cell 1.0, 2.0, 3.0, 4.0, or 4.0B
primary cabinet without integrated power
3- 18
Routing of T1/E1 and user alarm cables into a Modular Cell 4.0B
cabinet
3- 27
Connection of T1/E1 Lines to the EFIM punchdowns in Modular Cell
4.0B cabinets
3- 35
Connection of user alarms to the EFIM punchdown blocks in the
Modular Cell 4.0B primary cabinet
3- 48